Home > VAPOR PRODUCTS BY TYPE > Mods / RDAs / Supplies > Rebuild Tools / Wire / Accessories >

10 feet of Ti Coil Wire by Sweet Spot Vapors
10 feet of Ti Coil Wire by Sweet Spot Vapors
10 feet of Ti Coil Wire by Sweet Spot Vapors


 

Click photo below to see alternate views (if present):



Buy now for only: $10.99




Availability:
Items in stock ship TODAY (Mon-Sat) if ordered before 2PM CST!

Product code:
COILWIRE-TI

Sweet Spot Wire Gauge




Items missing from drop down list are out of stock.

Quantity:  
Description Warranty Information
 
This product is 10 feet of 0.4mm or 0.5mm Ti wire and real Muji, Japanese cotton (unbleached, peroxide free, organic)

Please use the dropdown menu to select your wire gauge.

SWEET SPOT VAPORS:
Sweet Spot Vapors Ti Wire is a revolutionary new vaping product. Ti wire is a temperature regulated resistance wire. This allows for UN-paralleled consistency and safety. Our positive temperature coefficient is suitable for BOTH mechanical devices, as well as regulated devices. Our Titanium will work with VV, VW and "Temperature Protected" devices. Since the calibration scale for Ni200 is very loose to begin with (not all Ni wire has the same tempco) the calibration discrepancy between "Ni200" and our specific Titanium wire should be negligible.

Our Titanium is NOT off the shelf metal. We have invested over one year of research and development, to solve the problems associated with "off the shelf" Titanium resistance wire. You will not find any other product like Ti wire on the market. It is specifically designed, from the ground up, for vaping and represents a first and only category, for "vape specific" Titanium.

Ti wire raises in resistance once it's optimum temperature is reached. This keeps your vapor cool and consistent, from the beginning of your hit to the end. Since the wire starts at a lower resistance, it comes up to temperature very quickly, until it's optimum is reached. Then the resistance climbs according to the amount of power that is put into the wire. This reduces the strain on your battery, while offering complete control of the heat inside of your atomizer.

Ti wire is made from a custom metallurgical process, that was developed with our foundry and drawing facility. Ti wire contains NO chromium, nickel, and trace iron is certified at 0.08%!!! The wire is made from certified medical grade titanium and undergoes a proprietary magnetic alignment process and vacuum annealing. This removes unwanted oxygen (plus surface impurities) and allows for the most consistent heating possible. Ti wire will NOT form any harmful chromium, nickel or iron oxides, and therefore the flavor of your liquid remains completely pure.

Ti wire also acts as a fuse. When the MAX temperature is exceeded Ti wire will "fail". This is by design, and will keep your battery safe.

WARNING : DO NOT DRY BURN Ti wire.....the wire is designed to fail above it's max temperature....dry burning is NOT necessary to form tight coils. You can apply low heat to crimp your coils (micro) through "pulsing" your mod, or using a low temperature torch. However we generally recommend "spaced" coils to allow for maximum flavor and heat dispersion. To clean your coils, it is not necessary to dry burn (wire will turn white when it has failed)...simply brush the coils off under warm water, and they will be as good as new.

The difference between 0.4mm and 0.5mm wire is the SPEED of which temp regulation occurs....neither one should be looked upon as a "gauge". It's not possible to compare to Kanthal or other similar wire, due to the way in which the wire responds to power input. Essentially 0.4mm Ti wire regulates temperature FASTER than 0.5mm, so it's ideal for VV/VW mods or tank builds....it will provide a slightly cooler vape, as the temp regulation occurs more rapidly. Ti wire 0.5mm has a slower ramp towards temperature regulation, so will build up slightly more heat in an atomizer. We recommend it for drippers with large amounts of air flow.

Ti wire 0.4mm starting (nominal) resistance is 1.2 ohms per foot...and 0.5mm starting (nominal) resistance is 0.78 ohms per foot. The resistance will climb according to power put into the wire. We recommend starting with one to two extra wraps per coil, compared to 24ga. Kanthal A-1. Since Ti wire is a completely new type of resistance wire, we recommend experimenting with different types of builds. You should not approach it in terms of "gauge" or "resistance at rest". The resistance is dynamic.....for example if you build to 0.4 ohm, and apply 30 watts of power...0.4mm Ti wire will climb to approx. 0.5 ohm in a 1-2 second "drag".

Comments and reviews are written and submitted by actual VaporKings.com (Tulsa area electronic cigarette supplies) website customers and do not reflect the views of VaporKings.com, its owners or its employees.

Average Customer Review:
4.5 of 5
Total Reviews: 4

Write a review.

  0 of 0 people found the following review helpful:

Comments and reviews are written and submitted by Vapor Kings customers
and do not reflect the views of VaporKings.com, its owners or its employees.

 
Well worth the cost. August 11, 2017
Reviewer: EdH from Boston, MA United States  
There are videos on YouTube graphically describing the vastly superior quality of this brand of Titanium wire. It lasts and lasts so someday I'll be back for more!

Was this review helpful to you?

  0 of 0 people found the following review helpful:

Comments and reviews are written and submitted by Vapor Kings customers
and do not reflect the views of VaporKings.com, its owners or its employees.

 
Wrong Packaging September 3, 2016
Reviewer: Tony DeCicco from Garland, TX US Virgin Islands  
It came in a cheap zip-lock bag, with one sheet of Kogi and a strand of 26 ga Titanium wire.   Have to get the correct TCR value, as this is NOT standard Titanium 1 wire.  Overpriced. Not happy.

Was this review helpful to you?

  0 of 0 people found the following review helpful:

Comments and reviews are written and submitted by Vapor Kings customers
and do not reflect the views of VaporKings.com, its owners or its employees.

 
Fantastic wire September 4, 2015
Reviewer: Jay Elrod from Glenpool, OK United States  
I use this in my Subtank Mini RBA deck. I use the .4mm wire 8wrap over 3mm rod and it ohm's out at 0.36ohms. This is definitely the easiest to work with and best wire for TC.

Was this review helpful to you?

  0 of 0 people found the following review helpful:

Comments and reviews are written and submitted by Vapor Kings customers
and do not reflect the views of VaporKings.com, its owners or its employees.

 
Excelent & Fast July 22, 2015
Reviewer: Michael Cox from Ahwahnee, CA United States  
My first time with Ti wire and i'm impressed. I'd
say as easy as Kanthal to build with. 6 wrap on a 3mm
rod 0.34 ohm.. on a Kayfun V4 - Sigelei 150..
learning curve is going to be intresting. Vaporkings
is my new go to place..Super Fast excellent packaging and 2 pieces of candy too !!  Thankyou

Was this review helpful to you?


We are your Tulsa area Electronic Cigarette Supplies company!

Browse for more products in the same category as this item:


VAPOR PRODUCTS BY TYPE > Mods / RDAs / Supplies > Rebuild Tools / Wire / Accessories