ABOUT SSL CERTIFICATES


We accept Visa, MasterCard and Discover credit cards for our DSE801 Classic Penstyle, DSE901 Mini, Joye510 and KR808D1 two piece e-Cigarettes, atomizers, cartomizers, batteries, e-Liquid and accessories
Join our mailing list!
You are here: Home > Rebuildables and supplies
Sort By:
Page of 1
.5 x .1mm Grade A-1 Kanthal flat resistance wire - 1 foot
.5 x .1mm Grade A-1 Kanthal flat resistance wire - 1 foot
Buy now for only: $1.95

(4)

1 foot section of .5 x .1mm flat ribbon Grade A-1 Kanthal resistance wire.  Used for rebuilding DIY atomizers.

This product is for advanced users and does not come with any instructions.

Made in USA
.7 x .1mm Grade A-1 Kanthal flat resistance wire - 1 foot
.7 x .1mm Grade A-1 Kanthal flat resistance wire - 1 foot
Buy now for only: $1.95

(2)

1 foot section of .7 x .1mm flat ribbon Grade A-1 Kanthal resistance wire.  Used for rebuilding DIY atomizers.

This product is for advanced users and does not come with any instructions.

Made in USA
.9 x .1mm Grade A-1 Kanthal flat resistance wire - 1 foot
.9 x .1mm Grade A-1 Kanthal flat resistance wire - 1 foot
Buy now for only: $1.95

(2)

1 foot section of .9 x .1mm flat ribbon Grade A-1 Kanthal resistance wire.  Used for rebuilding DIY atomizers.

This product is for advanced users and does not come with any instructions.

Made in USA
28ga Grade A-1 Kanthal resistance wire - 1 foot
28ga Grade A-1 Kanthal resistance wire - 1 foot
Buy now for only: $1.95

(17)

1 foot section of 28ga round annealed Grade A-1 Kanthal resistance wire.  Used for rebuilding DIY atomizers.

This product is for advanced users and does not come with any instructions.

Made in USA
30ga Grade A-1 Kanthal resistance wire - 1 foot
30ga Grade A-1 Kanthal resistance wire - 1 foot
Buy now for only: $1.95

(9)

1 foot section of 30ga round annealed Grade A-1 Kanthal resistance wire.  Used for rebuilding DIY atomizers.

This product is for advanced users and does not come with any instructions.

Made in USA
32ga Grade A-1 Kanthal resistance wire - 1 foot
32ga Grade A-1 Kanthal resistance wire - 1 foot
Buy now for only: $1.95

(6)

1 foot section of 32ga round annealed Grade A-1 Kanthal resistance wire.  Used for rebuilding DIY atomizers.

This product is for advanced users and does not come with any instructions.

Made in USA
34ga Grade A-1 Kanthal resistance wire - 1 foot
34ga Grade A-1 Kanthal resistance wire - 1 foot
Buy now for only: $1.95

(7)

1 foot section of 34ga round annealed Grade A-1 Kanthal resistance wire.  Used for rebuilding DIY atomizers.

This product is for advanced users and does not come with any instructions.

Made in USA
AGA-T2 rebuildable atomizer system - Pyrex tank
AGA-T2 rebuildable atomizer system - Pyrex tank
Buy now for only: $27.95

SALE PRICE: $19.95
That's $8.00 instant savings!  

(29)

You've heard about the "genesis style RBA", now own one.  The AGA T2 is a very durable and versatile rebuildable atomizer.  It even has the ability to run dual wicks/coils!

This is an advanced user device and does not come with any instructions.  We are unable to give support via email/phone so we suggest you either have prior experience or visit YouTube and watch the many videos on how to set these up.  Once running correctly, they work very very nicely!

510 threaded and should work on most any mod device.  Be extra careful if you are using this with a mechanical mod that has no short circuit protection.  Always test your coils with an Ohm meter prior to using!

This unit comes with the tank components assembled.   The coil and wick are -NOT- pre-made or installed...that is up to you!

Although your unit comes with everything necessary to build your own wick/coil, we also stock pre-rolled pre-oxidized stainless mesh wicks, silica wicks and Kanthal wire that is compatible with this system.

This accepts most 901/510 style drip tips.  A drip tip is -NOT- included.

Your AGA-T2 system comes with:

(1) AGA-T2 base and top cap with Pyrex glass liquid tank
(1) 1 1/2" x 1 1/2" piece of 400 stainless steel mesh (not pre-rolled)
(1) Piece of nichrome resistance wire suitable for making 1-3 coils
(1) Spare parts consisting of extra screws and gaskets

All metal construction with Pyrex glass liquid tank.
AGA-T3 rebuildable atomizer system - Pyrex tank
AGA-T3 rebuildable atomizer system - Pyrex tank
Buy now for only: $50.00

SALE PRICE: $40.00
That's $10.00 instant savings!  

(6)

The AGA-T3 is the newest RBA from YoudeTech (UD).

Featuring a pyrex glass tank, the T3 has a liquid chamber in the center. Your wick(s) sit down inside the chamber and bring e-Liquid up to the coil area.

This is an advanced user device and does not come with any instructions. We are unable to give support via email/phone so we suggest you either have prior experience or visit YouTube and watch the many videos on how to set these up. Once running correctly, they work very very nicely!

510 threaded and should work on most any mod device. Be extra careful if you are using this with a mechanical mod that has no short circuit protection. Always test your coils with an Ohm meter prior to using!

This unit comes with the tank components assembled. The coil and wick are -NOT- pre-made or installed...that is up to you!

Although your unit comes with everything necessary to build your own wick/coil, we also stock pre-rolled pre-oxidized stainless mesh wicks, silica wicks and Kanthal wire that is compatible with this system.

This accepts most 901/510 style drip tips. A drip tip is -NOT- included.

Your AGA-T3 system comes with:

(1) AGA-T3 base and top cap with Pyrex glass liquid tank
(1) small piece 400 stainless steel mesh (not pre-rolled)
(1) Piece of nichrome resistance wire suitable for making 1-3 coils
(1) Spare parts consisting of extra screws and gaskets

All metal construction with Pyrex glass liquid tank.

AGI rebuildable drip or tank atomizer system - Pyrex tank
AGI rebuildable drip or tank atomizer system - Pyrex tank
Buy now for only: $34.95

(3)

The AGI is the latest rebuildable atomizer.  This can function either as a Genesis style RBA or as a drip system by removing the tank portion.

This is an advanced user device and does not come with any instructions.  We are unable to give support via email/phone so we suggest you either have prior experience or visit YouTube and watch the many videos on how to set these up.  Once running correctly, they work very very nicely!

510 threaded and should work on most any mod device.  Be extra careful if you are using this with a mechanical mod that has no short circuit protection.  Always test your coils with an Ohm meter prior to using!

This unit comes with the tank components assembled.   The coil and wick are -NOT- pre-made or installed...that is up to you!

Although your unit comes with everything necessary to build your own wick/coil, we also stock pre-rolled pre-oxidized stainless mesh wicks, silica wicks and Kanthal wire that is compatible with this system.

This accepts most 901/510 style drip tips.  A drip tip is -NOT- included.

Your AGI system comes with:

(1) AGI base and top cap with Pyrex glass liquid tank
(1) 1 1/2" x 1 1/2" piece of 400 stainless steel mesh (not pre-rolled)
(1) Piece of nichrome resistance wire suitable for making 1-3 coils
(1) Spare parts consisting of extra screws and gaskets

All metal construction with Pyrex glass liquid tank.
Aluminum 510 threaded atomizer stand
Aluminum 510 threaded atomizer stand
Buy now for only: $2.95

(25)

These convenient little atomizer stands are a great way to store or display your various tanks or rebuildable atomizers while not in use.

Threaded for 510 style connectors.

Sold individually in your choice of color. Nimbus atomizer NOT included.
Atomizer and 510-eGo battery tester
Atomizer and 510-eGo battery tester
Buy now for only: $18.95

(20)

This handy little tester box will quickly and accurately tell you the resistance of an attached 510 threaded atomizer/cartomizer or measure the output voltage of a 510/eGo style battery.

To test an atomizer, simply screw it onto the right post and turn the unit on. The three segment LED display will show the resistance down to a 100th of an Ohm.

To test a battery, simply screw it onto the left post, turn the unit on and activate the battery. The three segment display will show the output voltage of the battery down to a 100th of a volt.

Extensions or adapters can be used to test other atomizers or cartomizers with different thread patterns.

I find this tester handy for rebuilding atomizers since it functions as a nifty little stand.

This unit requires two AA batteries - an inexpensive set are included so you can use it immediately out of the box!
C-Tratech rebuildable 510 drip atomizer
C-Tratech rebuildable 510 drip atomizer
Buy now for only: $19.95

(8)

510 drip style rebuildable atomizer from C-Tratech - PLEASE READ ENTIRE DESCRIPTION! THIS IS NOT FOR EVERYONE!

These rebuildable atomizers are very unique in that they produce VERY INTENSE flavor that is absolutely insane. You'll taste your liquids like never before.

This is an advanced user product and does -not- come with any instructions.

To replace the coil you simply unscrew the screws (screw driver included) on the positive and negative terminals. Replace coil, tighten screws and push wick
material into the liquid cup.

Replacement coils meter around 2.6 Ohms. Very advanced users can probably adjust resistance by shortening or lengthening coil length.

C-Tratech kit comes with:

(1) Atomizer base
(1) Atomizer base cover
(1) Black plastic drip tip (compatible with most all 510 style drip tips)
(6) Pre-made replacement coils/wicks (one already installed)
(1) Micro screw driver

(Photo shows one assembled unit and one unassembled. You will receive -one- unit.)
C-Tratech rebuildable eGo-T Type A tank atomizer
C-Tratech rebuildable eGo-T Type A tank atomizer
Buy now for only: $19.95

(2)

eGo-T Type A tank rebuildable atomizer from C-Tratech - PLEASE READ ENTIRE DESCRIPTION! THIS IS NOT FOR EVERYONE!

This is an advanced user product and does -not- come with any instructions.

To replace the coil you simply unscrew the screws (screw driver included) on the positive and negative terminals. Replace coil, tighten screws and push the end of the wick material up into the liquid feed lancet hole.

You will need to already have some eGo-T Type A liquid tanks or purchase some separately. The tank shown in the photo is not functional because it does not have a bottom cap (we don't understand why either).

Replacement coils meter around 2.4 Ohms. Very advanced users can probably adjust resistance by shortening or lengthening coil length.

C-Tratech kit comes with:

(1) Atomizer base
(1) Atomizer base cover
(1) Tank sleeve
(1) Black cloth carrying pouch
(6) Pre-made replacement coils/wicks (one already installed)
(1) Micro screw driver
CTraTech drip RBA replacement wick and coil
CTraTech drip RBA replacement wick and coil
Buy now for only: $1.95

This is 1 replacement pre-wound coil and wick for the CTraTech drip rebuildable atomizer. These do not work in the CTraTech tank atomizer.

The resistance can be adjusted with a little manipulation of the coil lengths.  These are for advanced users and do not come with any instructions.
e-Cigarette or mod hard waterproof case
e-Cigarette or mod hard waterproof case
Buy now for only: $24.95

(12)

These cases are ideal for anything you need to keep protected and dry. Think of these as the tough case extraordinaire for expeditions, boating, hunting, fishing, travel, camping, golf, travel, or any activity that calls for dry storage. This nearly indestructible carry case is ideal for electronic cigarettes, e-Cig mods, phones, keys, smaller digital cameras, MP3 players, jewelry, small hunting and fishing accessories, knives, pens, memory cards, and much more.

A rugged, airtight, and waterproof case to keep your belongings safe when youre on the go. Unlike other cases in its size class, full interior foam comes standard.

As shown in the photo, this case is holding three FULL SIZE mods, a GGTS with Ithaka, iHybrid Blue Dragon and a Silver Bullet (MODS NOT INCLUDED!) and still has some room for batteries and e-Liquid!

Features:

   Waterproof, dustproof, dent-resistant, crushproof, airtight
   Steel pinned hinge
   Internal Dimensions: 7.88" x 3.97" x 1.55"
   External Dimensions: 8.8" x 5.18" x 2.08"
   Fluted foam inserts
   Strap with plastic clip connector
   Color: Black
Ekowool rebuildable wick material
Ekowool rebuildable wick material
Buy now for only: $1.95

(15)

GENUINE EKOWOOL! NOT A CHINESE COPY PRODUCT!

Ekowool is a revolutionary wicking material from Russia that has taken the RDA/RBA world by storm. It has excellent wicking ability and withstands high heat without breaking down.

To clean Ekowool, simply dry burn your RDA/RBA until the material is red hot. Once it cools it will be clean and pure white again.

Ekowool adds no unpleasant flavor or taste to your e-Liquids. Sold in 1 foot lengths in your choice of 1mm stranded, 2mm hollow and 3mm hollow.

(Photo shows smaller lengths, but you will receive 1 foot per item ordered)
IGO-W triple post rebuildable drip atomizer
IGO-W triple post rebuildable drip atomizer
Buy now for only: $19.95

(2)

The Youde Tech IGO-W is a triple post rebuildable drip atomizer.  The top cap has opposing air holes.  Threaded for 510 style devices.  Stainless steel construction.

IGO-W Kit includes:  (2) o-rings, extra screw, silica wick and nichrome coil wire (about two inches).

This is an advanced user device and we are unable to provide any in depth technical help with setting this up.  We recommend viewing the many YouTube videos available.
IGO-W3 QUINTUPLE post rebuildable drip atomizer
IGO-W3 QUINTUPLE post rebuildable drip atomizer
Buy now for only: $24.95

(2)

The YoudeTech IGO-W3 is a five post rebuildable drip atomizer that is designed to make quad coil builds a breeze.

Four air slots in the build deck provide airflow to the coils and wicks. Simply rotate the top cap to open or close the vents to your desired airflow.

Standard 510 connection makes it compatible with most any 510 threaded mod device.

Standard 510 drip tip receptacle will accept most any of your 510 style drip tips (not included).

The IGO-W3 comes with:

(1) IGO-W3 atomizer base and cap
(2) Spare o-rings
(3) Silica wicks
(1) Small section of nichrome wire
(1) Spare insulator for center post
(1) Spare post screw
Kebo Russian 91% rebuildable atomizer system
Kebo Russian 91% rebuildable atomizer system
Buy now for only: $92.50

(43)

The Russian 91% from Kebo is a very advanced rebuildable atomizer tank system. The flavor that it's reduced chamber design produces is simply amazing.

This is very similar, and parts compatible with the Kayfun Lite, however this version includes adjustable air flow and an adjustable center pin on the 510 connector.

This product is NOT made by SvoMesto and should not be confused with their Kayfun products.

This item does not come ready to use...you must build your own coil. We strongly recommend researching two or three videos on YouTube so you fully understand how this device operates. Because it is an advanced user device we cannot provide support on how to build it.

Includes:

(1) Russian 91% atomizer made of 316 stainless steel

(1) 510 style drip tip adapter

(1) 10ml empty e-Liquid bottle

(1) Metal tank tube (replaces translucent plastic tube if you wish)

(1) Package of silica wick material - approx 2 feet

(1) Package of nichrome coil wire - approx 2 feet

(1) Package of misc replacement parts, screw driver tool and gaskets

(1) Kit box

Made in China

Keychain mini screwdriver
Keychain mini screwdriver
Buy now for only: $2.95

(7)

Keychain mini screwdriver has a phillips and flat head screwdriver inside. A perfect little tool for RDA or RBA users to keep in their pocket or carrying case.

Available in silver, red or blue. Sold individually.
KK Vapetek atomizer coil jig
KK Vapetek atomizer coil jig
Buy now for only: $19.95

(23)

The KK Vapetek coil jig is a handy little pocket device that makes wrapping coils simple and consistent every time.

Simply remove one of the wrapping posts from the internal compartment, insert it into the top hole and tighten the set screw. Wrap one end of your coil wire around the lower set screw and tighten it. Then simply begin wrapping your coil around the wrapping post until it has as many wraps as you require. When you're done, snip the ends and remove it from the wrapping post. You can also remove the wrapping post with the coil still on it and use it as a stabilization tool to attach it to your rebuildable atomizer.

A demonstration video can be watched below.

The three included wrapping posts are: 1/16", 3/32", and 1/8" in size. The set screw hole will accept up to 9/64" if you want to make your own larger rods.

The device also doubles as an atomizer stand since it has a 510 threaded hole in the center.

Please do not torch your coils while they are still attached to the jig body. The set screws are nylon and will melt. Also do not over tighten the set screws or you may strip them.

Made in the USA.

Kanthal wire shown in second photo is -not- included.
Pre-rolled and oxidized stainless 325 mesh wick
Pre-rolled and oxidized stainless 325 mesh wick
Buy now for only: $1.95

(12)

This is a pre-rolled and oxidized stainless steel wick for use in many rebuildable atomizer tank systems.  

325 mesh size

Approximately 1 1/2" to 1 3/4" in length and approximately 7/8" wide unrolled.

Price is for one wick

This product is for advanced users and does not come with any instructions.

Made in China
Pre-rolled and oxidized stainless 400 mesh wick
Pre-rolled and oxidized stainless 400 mesh wick
Buy now for only: $1.95

(40)

This is a pre-rolled and oxidized stainless steel wick for use in many rebuildable atomizer tank systems.  

400 mesh size

Approximately 1 1/2" to 1 3/4" in length and approximately 7/8" wide unrolled.

Price is for one wick

This product is for advanced users and does not come with any instructions.

Made in China
Raw stainless steel mesh sheets - 45x45mm
Raw stainless steel mesh sheets - 45x45mm
Buy now for only: $1.45

(12)

This is a 45x45mm square of raw unprocessed stainless steel mesh. Used for building your own atomizer wicks.

Available in 325, 400, 450 and 500 mesh size.

Made in China.

(Penny not included, used for size reference)
Replacement glass tank for Smok RSST Pyrex
Replacement glass tank for Smok RSST Pyrex
Buy now for only: $5.95

Replacement glass tank for the SmokTech RSST Pyrex rebuildable atomizer.

This glass tank tube will -not- work on the RSST with the plastic tank.

Sold individually.
Silica 2mm atomizer wick - 1 foot piece
Silica 2mm atomizer wick - 1 foot piece
Buy now for only: $0.95

(6)

1 foot piece of silica wick material for rebuildable atomizers. This wick is 2mm wide.

This product is for advanced users and does not come with any instructions.

Made in China
Silica 38mm L x 2mm W atomizer wicks - package of 5
Silica 38mm L x 2mm W atomizer wicks - package of 5
Buy now for only: $0.45

(7)

A package of 5 silica wicks for use with DIY atomizer systems.

Approximately 38mm in length and 2mm wide.

Package of five wicks.

This product is for advanced users and does not come with any instructions.

Made in China
SmokTech Pyrex RSST Genesis style tank
SmokTech Pyrex RSST Genesis style tank
Buy now for only: $24.95

(38)

The SmokTech RSST is a Genesis style atomizer with stainless steel construction and a Pyrex glass tank. 510 threads means it is compatible with most any mod on the market.

The deck is capable of a single wick and coil and has a unique spring loaded center post which easily captures the coil wire. A silicone fill port plug helps minimize leaking should the RSST be laid on its side.

The top cap will accept most any 510 style drip tip and comes with a stainless steel vase style drip tip.

Wick and resistance wire is -not- included in the kit.

Your SmokTech RRST Pyrex atomizer comes with:

(1) Atomizer body with Pyrex tube and stainless steel top cap
(3) Spare o-rings
(2) Spare fill port plugs
(2) Spare center post washers
(1) Spare center post spring
(1) Stainless steel vase style drip tip
VapoWire Kanthal A-1 resistance wire
VapoWire Kanthal A-1 resistance wire
Buy now for only: $8.95

(26)

VapoWire (by Temco) is an American made Kanthal A-1 resistance wire used to rebuild most any RBA or RDA known to exist.

Each box comes with 30 feet of premium VapoWire Kanthal A-1 wire in your size and shape of choice.

Vapor Kings stocks VapoWire in:

22 gauge round
24 gauge round
26 gauge round
28 gauge round
30 gauge round
32 gauge round
.5 mm x .1 mm flat
.7 mm x .1 mm flat
.9 mm x .1 mm flat
Vision Eternity 5 pack coils and wicks
Vision Eternity 5 pack coils and wicks
Buy now for only: $8.95

(7)

This is a 5 pack of replacement pre-wound coils and wicks with posts for the Vision Eternity rebuildable atomizer.

The resistance can be adjusted with a little manipulation of the coil lengths.  These are for advanced users and do not come with any instructions.
Vision Eternity rebuildable atomizer
Vision Eternity rebuildable atomizer
Buy now for only: $29.95

SALE PRICE: $21.95
That's $8.00 instant savings!  

(29)

Vision Eternity rebuildable atomizer - PLEASE READ ALL OF THIS BEFORE ORDERING! THESE ARE NOT FOR EVERYONE!

The Vision Eternity is a dual purpose rebuildable atomizer (RBA) with 510 style threading. It can function as a reservoir style drip atomizer or be converted to use eGo-T Type A style liquid tanks just by simply changing the top collar.

This is an advanced user device and comes with limited documentation. The Eternity RBA requires no tools to replace the coil/wick. Instead of screws it uses two steel collars which hold the coil leads to the positive and negative terminals.

The reservoir will hold over 30 drops of e-Liquid so you don't have to constantly drip to keep it wet. In this configuration we do not recommend pocket carrying.

The included replacement coils/wicks are around 1.8-2.2 Ohms in resistance. Very experienced users may be able to fine tune the resistance by shortening or lengthening the coil length.

Kit includes:

(1) Vision Eternity RBA base kit - base, lancet, drip and eGo-T Type A tank sleeves
(4) Pre-wound replacement wicks/coils (one already installed in device)
(1) Polished stainless steel drip tip for use with drip sleeve
(1) eGo/eGo-T/eGo-C battery thread cover
(2) Silicone tank caps for eGo-T Type A liquid tanks (tanks not included)
(1) Metal carrying case
(1) Reference booklet
XTAR clear battery case
XTAR clear battery case
Buy now for only: $0.95

(13)

This handy little plastic battery case from XTAR safely holds (2) 18650 cells or (4) 16340/18350 cells.

Perfect for traveling on airplanes or carrying a few extras around in your pocket without worry of your keys or pocket change causing a short circuit. We often call this the hot pocket dance! Don't let it happen to you!