|
|
|
|
|
|
U-CAN 8ml stainless steel liquid dispenser
|
|
|
The U-CAN 8ml liquid dispenser is a solid stainless steel liquid tank with a bottom mounted pump button and a sealed stainless steel cap. When the cap is on the tank you can press the pump button as many times as you want and it will not dispense or leak liquid.
It also features a stainless steel precision tip which is perfect for filling tanks, cartomizers or standard 3 piece design cartridges.
Easy to fill, you just unscrew the dispenser cap, refill and replace the cap.
To dispense liquid simply unscrew the top cap, turn upside down and place the dispenser tip in your cartridge and pump the button lightly.
The U-CAN is a little less than 3 inches long and under 1 inch wide. The top cap has a loop hole if you wish to attach it to a keychain or lanyard (not included).
Tastefully laser etched around the dispenser cap with our VK logo.
Photo shows one unit assembled and one unit disassembled. You will receive ONE liquid dispenser.
|
|
|
|
|
|
|
|
|
|
Vision VERSION 2 clearomizer with replaceable atomizer
|
|
|
You loved the Vision Clearomizer and now Vision has stepped it up another notch with the VERSION 2 clearomizer. Please don't confuse these with the original Vision "V2" - we know its frustrating but this is how the manufacturer named them. These are the "Version 2" clearomizer.
With the Version 2 you can now replace the atomizer heads as needed and raise or lower the resistance of the heads by simply swapping them out (sold separately). Version 2 atomizer heads feature the new long wicks for better liquid absorption to the coil.
Each unit comes assembled with a 1.8 Ohm atomizer head already installed. 1.8 Ohm is ideal for 3-3.7v applications. Higher resistances are available separately for other applications/voltages.
Available in a bright array of colors, the Vision Version 2 clearomizers also allow you to customize your vape setup! Use yellow for lemon, blue for blueberry,
(Photo shows 7 Vision Version 2 clearomizers but you will receive one ready to use unit in your choice of color)
|
|
|
|
|
|
|
|
|
|
Vision Version 2 clearomizer atty head
|
|
|
Replacement atomizer heads for Vision Version 2 clearomizers - please note these are -not- compatible with the original Vision Clearomizers or the Vivi Nova/Mini Vivi Nova tank system. These work only with the Vision Version 2 clearomizers.
Each atomizer head is laser etched showing the resistance value on the side.
Available in:
1.8 Ohm (LR voltage)
2.4 Ohm (Normal voltage)
2.8 Ohm (Higher voltage)
3.2 Ohm (Higher voltage)
4.0 Ohm (Higher voltage)
|
|
|
|
|
|
|
|
|
|
Drip tip adapter for Vision or Vision V2 clearomizers
|
|
|
This product does -not- come with a clearomizer - it is shown only for illustration - you will receive (1) one adapter per item ordered.
Now you can use most any 510/808/901 style drip tip on your Vision Clearomizers or Vision V2 Clearomizers! These are not required for the Vivi Nova or Mini Vivi Nova - they are already 510/808/901 driptip compatible.
Simply replace your plastic mouthpiece with this metal adapter and slip your drip tip into the top. It will only add about 4mm of length.
Features solid metal construction with chrome finish and silicone o-ring
Photo shows two adapters, one V2 Clearomizer and a driptip for reference. You will only receive one adapter.
|
|
|
|
|
|
|
|
|
|
Vision Clearomizer replacement mouthpieces
|
|
|
These are replacement mouthpieces that are compatible with the Vision Clearomizers and the Vision Version 2 Clearomizers. They are not compatible with Vivi Nova tanks and cannot be used as a standard drip tip.
Available in round or flat tip. Price is for one mouthpiece.
|
|
|
|
