ABOUT SSL CERTIFICATES


We accept Visa, MasterCard and Discover credit cards for our DSE801 Classic Penstyle, DSE901 Mini, Joye510 and KR808D1 two piece e-Cigarettes, atomizers, cartomizers, batteries, e-Liquid and accessories
Join our mailing list!
You are here: Home > High End Products
Sort By:
Page of 1
AUTHENTIC Chiyou Megan 318 26650 by Style of Mojo
AUTHENTIC Chiyou Megan 318 26650 by Style of Mojo
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $266.00

In USA stock and ready to ship!!


(1)

AUTHENTIC Korean made Chiyou Megan 318 26650 mod by Style of Mojo.

This is an absolutely exquisite piece of work! Polished stainless steel with polished brass end caps set this device off very nicely.

The Megan 318 features a spring loaded self adjusting center pin in the top caps. The brass battery contact is adjustable with a few simple turns.

The Chiyou Megan is a 26650 mod that comes with two styles of top caps. One is a flat top cap with air slots and the other is a slant cut and 5mm recessed cap that will accommodate most any 22mm style atomizer to give you a nice sleek look.

The bottom recessed switch is nice and large for ease of use. A counter clockwise lock ring prevents the device from firing in pockets or purses.

The tube is engraved with the Style of Mojo logos and a unique serial number. The button has Style of Mojo and the logo engraved.

This device uses a single 26650 battery cell and we recommend either the Sony or MNKE cells.

Made in Korea
AUTHENTIC Panzer GOLDEN ARMY edition by Masterpiece Custom Vapes
AUTHENTIC Panzer GOLDEN ARMY edition by Masterpiece Custom Vapes
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $265.95

In USA stock and ready to ship!!


(1)

AUTHENTIC Philippine made Panzer GOLDEN ARMY edition mod by Masterpiece Custom Vapes

The GOLDEN ARMY is primarily made of solid brass except for the stainless steel switch housing and copper switch button.

A standard 510 connector and non-flat cap deck makes it compatible with just about anything 510 that you can screw on it.

A bottom mounted firing switch is locked or unlocked by simply rotating the bottom mounted lock ring. The switch on this device is BUTTER smooth.

Solid copper center pin ensures maximum voltage and current is delivered to your atomizer. The connector pin is a floating style center pin.

These may have a thin coating of machine oil on them. It is strongly recommended that you thoroughly clean the entire mod before using.
AUTHENTIC copper Overdose by Masterpiece Custom Vapes
AUTHENTIC copper Overdose by Masterpiece Custom Vapes
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $255.95

In USA stock and ready to ship!!


AUTHENTIC Philippine made copper Overdose mod by Masterpiece Custom Vapes

The Overdose is a solid copper device except for the top and bottom cap insulators. Copper means conductivity!

The top cap features a copper self adjusting center pin with adjustable battery tab inside.

Standard 510 connector makes it compatible with most anything 510.

Short throw button is very simple to operate and features a counter clockwise lock ring.

These are copper and will tarnish. Your device may arrive already tarnished. We do not polish them before shipping.
AUTHENTIC Hammer mod by Kato
AUTHENTIC Hammer mod by Kato
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $246.00

In USA stock and ready to ship!!


AUTHENTIC Hammer mod by Kato Korea

The Hammer is a well sought after pipe style mod made from high grade 316 stainless steel. It is polished to a mirror finish and features some very intricate and deep etched art work all around it. These look absolutely sick with a Kayfun atomizer on them!

The very wide and comfortable mechanical push button can be operated easily in many positions. A long ring can be turned to prevent the button from firing.

It uses a single 18350 battery cell and has solid brass contacts. A tube from an Astro mod can be used to allow a 18500 battery to fit in the Hammer. The tube is not included.

Standard 510 connection. Vent holes are in the bottom cap.

Your Kato Hammer comes with the wooden box shown in the photo. Each Hammer has a unique serial number etched on the body.
AUTHENTIC Changeling by Olympus Creations
AUTHENTIC Changeling by Olympus Creations
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $236.00

In USA stock and ready to ship!!


(1)

AUTHENTIC USA Made Changeling mod by Olympus Creations

From the maker of the ever popular Pegasus mod comes the Changeling. The changeling is a solid copper 18650 mod that is made from 99.9% solid copper other than the top insulator.

The Changeling comes with two stainless steel sleeves. One is slotted with three vertical slots and a horizontal slot to display the serial number. The other sleeve is solid.

A simple to operate knurled lock ring locks or unlocks the bottom mounted firing button. The switch is magnetic and contains no spring.

On the 510 threaded top cap, the solid copper center pin self adjusts to your atomizer. An easy to adjust battery top post pin can be adjusted to eliminate battery rattle.

Use one single 18650 battery cell (not included). Device is 22mm wide WITH sleeve installed and 20.5mm WITHOUT sleeve installed. Top cap and button are still 22mm wide regardless.

You will receive the Changeling copper mod and two stainless steel sleeves. Also included is a free G-Case carrying pouch and felt bag to store one stainless sleeve.

PLEASE NOTE! The finish on the stainless sleeves may have some imperfections that can be polished or buffed out, these aren't 100% perfect out of the box. The copper tube on the mod could also contain fine scratches from the stainless sleeves being put on.

Made in the USA!
AUTHENTIC Panzer Black Hawk by Masterpiece Custom Vapes
AUTHENTIC Panzer Black Hawk edition by Masterpiece Custom Vapes
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $236.00


CURRENTLY SOLD OUT!


(4)

AUTHENTIC Philippine made Panzer Black Hawk edition mod by Masterpiece Custom Vapes

This is a 304 stainless steel gunmetal coated mod which adapts to any battery size between 18350 and 18650 simply by removing or adding the modular tubes.

A standard 510 connector and non-flat cap deck makes it compatible with just about anything 510 that you can screw on it.

A bottom mounted firing switch is locked or unlocked by simply rotating the bottom mounted lock ring. The switch on this device is BUTTER smooth.

Solid copper center pin ensures maximum voltage and current is delivered to your atomizer. The connector pin is a floating style center pin.

These have a coating of machine oil on them. It is strongly recommended that you thoroughly clean the entire mod before using.
AUTHENTIC 2six 26650 mod by Tarsius Customs
AUTHENTIC 2six 26650 mod by Tarsius Customs
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $215.95

AUTHENTIC Philippine made 2six mod by Tarsius Customs

The 2six from Tarsius Customs is a 26650 hybrid mod. It features a pinless hybrid top cap like its little brother the 4nine. Your atomizer absolutely must have a protruding center pin to work safely with this device!

The bottom switch is a little different from the 4nine in that it isn't two opposing magnets but rather a switch assembly. A solid copper pin on the switch ensures maximum conductivity. The recessed button will not fire if you set the unit down on a flat surface.

This device is 30mm wide and 81mm tall.

Requires (1) 26650 battery (not included).

Available in stainless steel or tiger brass.

Made in the Philippines
AUTHENTIC "The Copper" 26650 mod by Scottua
AUTHENTIC "The Copper" 26650 mod by Scottua
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $211.00

In USA stock and ready to ship!!


AUTHENTIC USA Made "The Copper" 26650 mod by Scottua.

Machined from a solid bar of 99.95% pure copper, this mod is one of the hardest hitting on the market today. It is a two piece design where the top cap (28x1 threads) can be removed but the button assembly is held in place by a strong steel c-clip. Measures 30mm OD x 96mm Tall

The center pins and button are also 99.95% pure copper. The top cap insulator is a high temperature capable PEEK material.

The recessed bottom button is engraved with the logo and unique serial number. A set of N52 neodymium magnets provide a lifetime of consistent button operation.

The Copper uses a single 26650 cell and we recommend the Sony or MNKE cells (not included).

Two bottom insulator rings are included.

Made in the USA!
AUTHENTIC Dusza mod by Ghost Modder USA
AUTHENTIC Dusza mod by Ghost Modder USA
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $226.00

SALE PRICE: $200.00
That's $26.00 instant savings!  

In USA stock and ready to ship!!


AUTHENTIC USA Made Dusza mod by Ghost Modder USA

Solid stainless steel with brass top and bottom caps. Recessed switch does not have a locking mechanism but cannot fire standing upright.

Works with a single 18650 battery cell. Adjustable brass center pin and battery contact pin.

Unique serial numbers start with VK! Very cool laser engraving on the switch face!

Made in the USA!
AUTHENTIC Rose V2 atomizer by Eden Mods
AUTHENTIC Rose V2 atomizer by Eden Mods
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $199.95

In USA stock and ready to ship!!


Introducing The Rose V2 Atomizer

See the video below that demonstrates a build on the Rose atomizer!

The Rose is a very special device for connoisseurs. The Rose's feature list is unique. No atomizing device available today can offer a feature rich list as comprehensive as The Rose.

Main Characteristics:

Material: Stainless Steel Type 316 (half tank is made of clear polycarbonate with a spare Stainless Steel 316 half tank)
Diameter: 22mm
Length (including drip tip and connector): 79,5mm
Length (excluding drip tip and connector): 54,5mm
Wick type: Silica rope or cotton
Connector type: 510 (M7x0,5mm Pitch)
Tank Capacity: 3.7ml

Special Features:

Single coil or dual coil configurations - Single coil with 2 wicks or 2 coils with a wick each
Airflow control ring - Fully open will offer a 2.0mm hole for airflow
Juice flow control - By turning the drip tip, you can adjust the flow of juice onto the coil
Ceramic coil cup - You can choose to not use the coil cup if you prefer
Re-coiling without emptying tank - Simply invert and unscrew the coil head assembly for re-coiling
No resistance wire not needed - Careful attention has been made to the ease of setting up a coil in The Rose
Inverted or regular e-juice filling - Either remove the coil head or the top cap to fill with your favourite e-juice
Adjustable 510 centre pin - Made from lead-free brass

Exclusive gift:
Each Rose Atomiser comes with a stand made from Stainless Steel 316 so you can rest your inverted Rose while re-coiling without fear of spilling your e-juice
If you invert the stand, it will allow you to store your Rose by screwing it into the 510 thread on the stand

Spares:
Included with The Rose is a kit of spares including a Stainless Steel 316 half tank, spare ceramic cup, o-rings, screws with allan key and some wick and wire to get you started!

All in a beautifully made presentation box.

Made in the UK.
AUTHENTIC "The Copper" 18650 mod by Scottua
AUTHENTIC "The Copper" 18650 mod by Scottua
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $195.95

In USA stock and ready to ship!!


(1)

AUTHENTIC USA Made "The Copper" 18650 mod by Scottua.

Machined from a solid bar of 99.95% pure copper, this mod is one of the hardest hitting on the market today. It is a two piece design where the top cap (20x1 threads) can be removed but the button assembly is held in place by a strong steel c-clip. Measures 22mm OD x 96mm Tall

The center pins and button are also 99.95% pure copper. The top cap insulator is a high temperature capable PEEK material.

The recessed bottom button is engraved with the logo and unique serial number. A set of N52 neodymium magnets provide a lifetime of consistent button operation.

The Copper uses a single 18650 cell and we recommend the Sony VTC3 or above (not included).

Three bottom insulator rings are included.

Made in the USA!
AUTHENTIC Panzer stainless/brass by Masterpiece Custom Vapes
AUTHENTIC Panzer stainless/brass by Masterpiece Custom Vapes
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $195.95


CURRENTLY SOLD OUT!


(3)

AUTHENTIC Philippine made Panzer stainless/brass mod by Masterpiece Custom Vapes

This is a 304 stainless steel with brass accents mod which adapts to any battery size between 18350 and 18650 simply by removing or adding the modular tubes.

A standard 510 connector and non-flat cap deck makes it compatible with just about anything 510 that you can screw on it.

A bottom mounted firing switch is locked or unlocked by simply rotating the bottom mounted lock ring. The switch on this device is BUTTER smooth.

Solid copper center pin ensures maximum voltage and current is delivered to your atomizer. The connector pin is a floating style center pin.
AUTHENTIC Totem mod from Brothers in Customs
AUTHENTIC Totem mod from Brothers in Customs
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $186.00

In USA stock and ready to ship!!


(1)

AUTHENTIC Totem mod from Brothers in Customs.

The Totem mod is a stainless steel mod with brass top cap and lock ring. Three tubes are included to accommodate 18350, 18500 or 18650 batteries.

Standard 510 threads fit more any atomizer with 510 threading.

The top cap center pin is adjustable with a screwdriver and the battery contact pin is adjustable by finger.

Silver plated contact pins on the top and bottom caps.

The button is very precise and easy to operate and has a counter clockwise lock ring.
AUTHENTIC Fairy mod from JinaMods
AUTHENTIC Fairy mod from JinaMods
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $186.00

In USA stock and ready to ship!!


(2)

AUTHENTIC South Korean made Fairy mod by JinaMods

This unique and attractive brass mod is sheathed with two tubes of real ebony wood. It's quite a striking contrast between the brass finish and the wood. We're not sure why they named it the Fairy but it's quite the piece for a man or a woman.

The entire mod besides the wood pieces is made from solid brass. The wood tubes float on the brass tube and are held in place by the end caps. Adjustable top cap pins and locking ring for the button.

Takes one single 18650 battery cell (not included). Comes with box as shown.

Unique serial number is laser etched into the center collar.

What is Ebony Wood?

Ebony wood is dense enough to sink in water. Modern uses are largely restricted to small items, such as crucifixes, and musical instrument parts, including black piano and harpsichord keys, violin, viola, guitar, double bass, and cello fingerboards, tailpieces, pegs, chin rests, and bow frogs. Many plectrums, or guitar picks, are made from this black wood. Traditionally, the black pieces in chess sets were made from ebony, with rare boxwood or ivory being used for white pieces. Modern East Midlands-sytle lace-making bobbins, also being small, are often made of ebony and look particularly decorative when bound with brass or silverwire. Due to it strength, many handgun grips and rifle fore-end tips are made of ebony, as are the butts of pool cues.


Made in South Korea
AUTHENTIC stainless steel Turtleship V3 mod by RJMod
AUTHENTIC stainless steel Turtleship V3 mod by RJMod
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $186.00

In USA stock and ready to ship!!


(1)

AUTHENTIC Korean made Turtleship V3 mod by RJMod

This is a solid stainless steel mod which adapts to any battery size between 18350 and 18650 simply by removing or adding the modular tubes.

A standard 510 connector and slotted cap deck makes it compatible with just about anything 510 that you can screw on it.

A bottom mounted firing switch is locked or unlocked by simply rotating the bottom mounted lock ring. The switch on this device is BUTTER smooth.

Solid brass center pin ensures maximum voltage and current is delivered to your atomizer. The connector pin is a floating style center pin.
AUTHENTIC brass Turtleship V3 mod by RJMod
AUTHENTIC brass Turtleship V3 mod by RJMod
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $186.00

In USA stock and ready to ship!!


(2)

AUTHENTIC Korean made Turtleship V3 mod by RJMod

This is a solid brass mod which adapts to any battery size between 18350 and 18650 simply by removing or adding the modular tubes.

A standard 510 connector and slotted cap deck makes it compatible with just about anything 510 that you can screw on it.

A bottom mounted firing switch is locked or unlocked by simply rotating the bottom mounted lock ring. The switch on this device is BUTTER smooth.

Solid brass center pin ensures maximum voltage and current is delivered to your atomizer. The connector pin is a floating style center pin.
AUTHENTIC PROW-T tank atomizer by RJ MODS
AUTHENTIC Prow-T tank atomizer by RJ MODS
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $186.00

In USA stock and ready to ship!!


Authentic Prow-T tank atomizer from RJ Mods. This is a Genesis style tank atomizer and includes a stainless steel drip tip.

510 threads makes it compatible with most anything 510 threaded
Stainless steel brushed finish
Each unit has a unique serial number
Coil posts have a flat design for ease of use
Support for dual coil configurations or single coil by including two top caps
22mm size fits flush with most all 22mm mod devices
316 stainless steel
Pyrex glass tank has a 3.5ml liquid capacity
Insulated 2mm wick holes

AUTHENTIC AR mod by Tac Mods USA
AUTHENTIC AR mod by Tac Mods USA
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $185.95

(3)

AUTHENTIC USA Made AR mod by Tac Mods USA

All of our AR mods come with the magnetic switch upgrade. The spring is -not- included.

The AR Mod has a smooth steel body that fits most any 18650 battery. The rails look like a traditional AR-15 but they smoothed out and chamfered to fit comfortably and nicely in your hand. This patent pending design also allows your hands not to slide down the body tube like most traditional mods. This gives you a smooth grip in your hands to fire the octagonal shaped bottom button. All the contact pins in the AR Mod are copper to allow for maximum connectivity. We have done voltage drop test and the AR Mod has a voltage drop around .03-.05.

The AR Mod has knurled bottom cap and top cap designs to give the mod a rough looking design. There is a small chamfer on the top cap that comes to a point at 22mm to give a good flush look on all 22mm drippers. The top cap has 2 adjustable pins to fit each flat top and button top batteries. Each AR Mod has been tested to ensure each mod works properly. Each AR Mod comes with its own serial number engraved on the rail as well with a custom dog tag with matching serial numbers to ensure authenticity.

The black version is Cerakoted and the stainless version is just bare stainless steel.


3.37″ tall (body only)
1″ wide
4.2″ Total body length with top and bottom caps

AUTHENTIC Pegasus by Olympus Creations USA
AUTHENTIC Pegasus by Olympus Creations USA
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $180.00


CURRENTLY SOLD OUT!


(3)

THESE ARE SOLD OUT COMPLETELY AND NO MORE WILL BE PRODUCED

These are IN STOCK in our Oklahoma warehouse - get one quick before they sell out!

Please note these are not polished up to a brilliant shine...you may need to hit them with a polishing cloth when you receive them.

AUTHENTIC USA Made copper Pegasus mod by Olympus Creations

Crafted entirely out of solid 99.9% pure billet copper except for the top cap insulator

18650 tube accepts most any 18650 style battery by adjusting the top cap battery pin

22mm in diameter matches up with most all 22mm sized rebuildable tanks and dripping atomizers

Vent holes hidden inside the switch button

Knurled lock ring at the base twists easily to lock or unlock the bottom mounted switch

Unique serial number laser engraved on the button face

Floating top center pin with adjustable battery pin

Magnetic switch never wears out or collapses
AUTHENTIC Biomech Gen 2 by Masterpiece Custom Vapes
AUTHENTIC Biomech Gen 2 by Masterpiece Custom Vapes
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $175.96


CURRENTLY SOLD OUT!


(4)

AUTHENTIC Philippine made Biomech Gen 2.0 telescopic mod by Masterpiece Custom Vapes

From the maker of the Panzer and Panzer Blackhawk edition comes the Biomech Gen 2.0.

This is a solid 304 stainless steel and brass accented telescopic mod which adapts to any battery size between 18350 and 18650 simply by turning the tube in or out.

A standard 510 connector and slotted cap deck makes it compatible with just about anything 510 that you can screw on it.

A bottom mounted firing switch is locked or unlocked by simply rotating the bottom mounted lock ring. The switch on this device is BUTTER smooth.

Solid copper center pin ensures maximum voltage and current is delivered to your atomizer.

Biomech logo and serial number is engraved in the switch face. Bottom tube has model name engraved as well.
AUTHENTIC 4Nine mods by Tarsius Customs
AUTHENTIC 4Nine mods by Tarsius Customs
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $175.95

AUTHENTIC 4Nine mods by Tarsius Customs.

Available in: Stainless steel with brass top and button, brass with stainless steel top and button or solid copper.

The 4Nine is a "hybrid" mod, meaning it doesn't technically have a "top cap" like most mods. Instead there is a 510 threaded ring which screws onto your atomizer. You then thread the ring into the device and the center pin on your atomizer makes direct contact with the top of your battery. There is no center pin. This means less voltage drop! You must make sure your atomizer has an adequately exposed center post. If the center pin is not exposed, you have the potential to create a direct short.

The 4Nine is a SUPER COMPACT three tube unit which can adjust to 18350, 18490/18500 or 18650 batteries. Because of the hybrid design, we strongly suggest button top batteries.

The machining on the tubes is so precise that many people don't realize there are three tubes! Be careful though because the tube edges can be very sharp!

The recessed switch is a two piece magnetic system. You attach a magnetic spacer to the bottom of your battery and make sure the bottom is the opposing side to the switch itself.

Each switch is engraved with the lemur and a serial number. The stainless steel units are known as "male" versions and have brass tops and buttons. The brass are "female" and have stainless steel tops and buttons. The copper are the "child" and are 100% copper. Please note that copper does tarnish and you will probably receive the device tarnished.

When you receive your unit, remove the top plate and thread it onto your atomizer. Visually make sure the center pin on the atomizer is exposed. Some atomizer pins are adjustable, some are not.

Adjust your tubes to fit the desired battery length.

Drop the button and magnet out of the bottom tube and separate them. Pay attention to the side of the magnet that is stuck to the button. This side needs to go on the negative end of your battery. Drop the button back into the tube making sure the engraved side is facing outwards and that it is fully seated. When you drop the battery back in the tube, it should bounce up and down. If you heard a loud CLICK, you put the magnet on backwards.

Enjoy!
AUTHENTIC Knight by Vape Smith
AUTHENTIC Knight by Vape Smith
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $165.95

AUTHENTIC Philippine made Knight mod by Vape Smith

The Knight mod from Vape Smith comes in two reflective and amazing finishes. Carbon fiber or a brilliant greenish Kevlar.

Floating top center pin with adjustable battery pin

Silver plated copper pins

High temp center pin insulator

18650 only tube with tiger bronze inside and carbon fiber or kevlar finish outside

Attractive logo in tube shows metal underneath

Locking switch with unique serial number

Laser engraved logo on bottom of button

23mm in diameter
AUTHENTIC Castle mod by Vape Smith
AUTHENTIC Castle mod by Vape Smith
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $156.00


CURRENTLY SOLD OUT!


(2)

AUTHENTIC Castle mod by Vape Smith

Standard 510 threads and airflow cut top cap

Modular design supports 18650, 18500 and 18350 mod by including three individual tubes.

Stainless steel outer tube and brass inside tube

Silver plated copper pins

Button ring locks and unlocks with a simple few twists
AUTHENTIC Duwamish mod by Strong Hold Workz
AUTHENTIC Duwamish mod by Strong Hold Workz
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $141.00

In USA stock and ready to ship!!


AUTHENTIC Duwamish mod by Strong Hold Workz

The Duwamish is a telescopic mod that can adjust to any battery size between 18350 and 18650.

It is made of 304 stainless steel with a brass accent at the bottom and a brass button that has short throw and is super smooth. This device has fairly thin walls and therefore is a bit lighter than most stainless mods. The thin walls don't appear to make it weak in any fashion. The lower tube is drilled with vent holes. You can swap the tubes so the larger one is on the bottom or the top.

Top cap is grooved for air flow and the center pin is self adjusting. Top and bottom pins are silver plated copper.

Bottom mounted button locks easily with a few twists of the lock ring.

Uniquely engraved on the side with a Duwamish style Indian head and serial number. The button face is also engraved as shown in the photos.

22mm in width and has a standard 510 connection.
AUTHENTIC USA made Veritas RDA by iHybrid
AUTHENTIC USA made Veritas RDA by iHybrid
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $126.00

In USA stock and ready to ship!!


(4)

AUTHENTIC USA made Veritas veritical coil RDA by iHybrid

The Veritas is a very unique rebuildable atomizer. It features a single adjustable air hole which splits into dual air channels inside the chamber. Dual vertical coil capable with a nice deep e-Liquid well in the deck.

Specifications:

22mm diameter
510 connector is compatible with most any 510 threaded mod
Reduced air chamber intensifies flavor
Made of 304 stainless steel
Top cap engraving

Made in the USA
AUTHENTIC Origen V2 vertical coil RDA
AUTHENTIC Origen V2 vertical coil RDA
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $126.00

In USA stock and ready to ship!!


(1)

AUTHENTIC Origen V2 vertical coil dripping atomizer by Norbert. It can be built in single or dual vertical coil and the top cap is ready for either configuration.

The V2 is now a bit shorter than the V1. It also features a large and deep common juice well versus two separate chambers. Your coil wicks sit in this well for constant exposure to e-Liquid.

Each unit has a unique serial number and engraving on the bottom.

Stainless steel construction and standard brass center pin.

Comes with spare o-rings, hex tool and an extra post screw.

Photo shows three Origen V2's for illustration. Sold individually.

Made in Hungary.
AUTHENTIC CATS dripping atomizer by RJ MODS
AUTHENTIC CATS dripping atomizer by RJ MODS
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $126.00


CURRENTLY SOLD OUT!


(2)

Authentic CATS dripping atomizer from RJ Mods. This is a quad coil, reduced chamber with adjustable airflow dripping atomizer

510 threads makes it compatible with most anything 510 threaded
22mm diameter fits flush with most all 22mm mod devices
Stainless steel conical chamber and polished brass engraved cover
Adjustable airflow control ring
Includes a stainless steel and Teflon insulated drip tip
Extra o-rings are included with the kit

AUTHENTIC Magma RDA from Paradigm Mods
AUTHENTIC Magma RDA from Paradigm Mods
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $121.00

In USA stock and ready to ship!!


AUTHENTIC Philippine made Magma RDA from Paradigm Mods

The Magma RDA is a unique 22mm atomizer cut from 304 surgical stainless steel. It features side air holes (1, 2 or 3mm) but channels the air flow horizontally inside the chamber directly onto the bottom of your coil and wick. Your wick(s) extend down into the deep juice well so they are constantly exposed to liquid and stay wet. A domed chamber top cap condenses vapor to intensity flavor.

The Magma is a two post RDA and can be used in a single or dual coil configuration. The negative post is welded to the atomizer deck for maximum durability. Positive post insulator is hidden deep in the atomizer base to prevent damage from heat. Post screws are standard flat head and require no special tools or hex wrenches.

No o-rings to maintain or replace!

Comes with small box shown in photo.

Made in the Philippines
AUTHENTIC Grand Vapor Trident V2 RDA
AUTHENTIC Grand Vapor Trident V2 RDA
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $105.95


CURRENTLY SOLD OUT!


(4)

AUTHENTIC Philippine made Trident V2 rebuidable dripping atomizer from Grand Vapor.

The Trident V2 is approximately 21mm wide and is 510 threaded for maximum compatibility with most any device.

Features:

Air flow is adjustable by rotating the air flow ring in the center of the atomizer.

Solid copper center pin ensures good contact and conductivity.

Triple posts with through hole design ensures your coil terminals make good contact and don't move.

Cap style terminal screws contact your coil wire on two sides instead of smashing it in the center of the post.

Precision machined out of stainless steel.

Dual o-rings on the deck base ensure a secure cap fit and no leaking between the base and cap.

Photo displays two Trident V2 atomizers. You will receive ONE unit per item ordered. Original box shown in picture may not be included since some of them were damaged/cracked in shipment to us.
Patriot V2 USA Made RDA - Brushed stainless steel
Patriot V2 AFC USA Made RDA - Brushed stainless steel
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $89.95

In USA stock and ready to ship!!


AUTHENTIC USA Made Patriot V2 AFC rebuildable drip atomizer from InnoVape

Gunmetal and black versions have a gold plated center contact.

There are a lot of fake Patriot atomizers being sold on the market. To verify that you're buying an original, visit InnoVape's distributor list on their website at: http://www.innovapemods.com/#!distributors/c1mya

The Patriot is a 22mm dripping atomizer designed and made in the USA.

Features:

Large deep deck well allows you to drip more liquid into the RDA. This means more draws in between topping off.

Dual air holes for maximum air to wick exposure. Most people enlarge these holes but that is up to you.

Triple posts wth through hole design ensures your coil terminals make good contact and don't move.

Precision machined out of 303 stainless steel.

Dual o-rings on the deck base ensure a secure cap fit and no leaking between the base and cap.

Unique heat sink fins on the top cap help dissipate heat.

Available in polished stainless steel, brushed stainless steel, gunmetal and matte black. Sold individually.
- See more at: http://www.vaporkings.com/AUTHENTIC-v1-2-Patriot-...
There are a lot of fake Patriot atomizers being sold on the market. To verify that you're buying an original, visit InnoVape's distributor list on their website at: http://www.innovapemods.com/#!distributors/c1mya

The Patriot V2 is a 22mm dripping atomizer designed and made in the USA.

All the great specs of the original but now with:

Delrin drip tip insulator port (replaceable)
Upgraded Peek bottom insulator made to withstand twice the heat
Includes two nickel plated AFC rings to give the body a flush look
24k gold plated center post
Removable top cap
3 piece design

High volume tank equals higher air flow for larger vapor clouds; more room for wick equals more juice for more hits. Measures 22mm for a flush look on most mods.

Precisely sized vapor ports allow laminar flow for a clean steady pull with no turbulence in the vape stream

Zero resistance press fit terminal posts keep the power constant on every hit.

Unique dynamic quad ring seal keeps any extra juice inside the tank

Through hole terminal design guarantees positive multi-point electrical contact to deliver maximum current to the coils.

Precision machined components from the highest grade 303 stainless steel ensure exact fits for consistent, even current draw to coils

Dual o-ring design adds mechanical stability to tank and drip tip while keeping the air stream on the coils where you want it to maximize the vape.

Unique heat sink fin gives it that custom look and design and also removes up to 50% more heat during a chain vape.

Available In brushed stainless steel
Gunmetal and black versions have a gold plated center contact.

There are a lot of fake Patriot atomizers being sold on the market. To verify that you're buying an original, visit InnoVape's distributor list on their website at: http://www.innovapemods.com/#!distributors/c1mya

The Patriot is a 22mm dripping atomizer designed and made in the USA.

Features:

Large deep deck well allows you to drip more liquid into the RDA. This means more draws in between topping off.

Dual air holes for maximum air to wick exposure. Most people enlarge these holes but that is up to you.

Triple posts wth through hole design ensures your coil terminals make good contact and don't move.

Precision machined out of 303 stainless steel.

Dual o-rings on the deck base ensure a secure cap fit and no leaking between the base and cap.

Unique heat sink fins on the top cap help dissipate heat.

Available in polished stainless steel, brushed stainless steel, gunmetal and matte black. Sold individually.
- See more at: http://www.vaporkings.com/AUTHENTIC-v1-2-Patriot-...
Patriot USA Made 26650 RDA - Brushed stainless steel
Patriot USA Made 26650 RDA - Brushed stainless steel
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $89.95

In USA stock and ready to ship!!


AUTHENTIC USA Made Patriot 26650 RDA from InnoVape.

The 26650 Patriot atomizer is the perfect companion for your 30mm 26650 mods. Utilizing the familiar 22mm deck of the 18650 Patriot, this one is upgraded with the gold plated center pin for maximum conductivity. The 30mm top cap comes with two stock air holes which could be drilled out larger if you desire. InnoVape does suggest the use of cutting oil if this is done.

Through hole posts with phillips screws make securing your coil leads very simple.

Made from 303 stainless steel.

Comes with extra terminal screw and o-ring.

Made in the USA.
AUTHENTIC Castle RDA by Vape Smith
AUTHENTIC Castle RDA by Vape Smith
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $89.95


CURRENTLY SOLD OUT!


(13)

AUTHENTIC Philippine made Castle RDA by Vape Smith

The Castle is a 22mm dripping atomizer with a 510 connection to maintain compatibility with a wide variety of mods.

Pair this up with one of Vape Smiths Royal drip tips for a unique looking device!

Features:

Large deep deck well allows you to drip more liquid into the RDA. This means more draws in between topping off.

Copper center post maintains maximum power from your device to the deck center post.

Dual adjustable air holes for maximum air to wick exposure. Caps are pre-drilled for 1.5, 2.0 and 2.5mm air holes. To adjust simply remove and rotate the top caps.

Triple posts with through hole design ensures your coil terminals make good contact and don't move. Phillips head screws means you don't have to keep track of any special allen wrenches to rebuild or maintain your RDA.

Precision machined out of 304 food grade stainless steel.

Dual o-rings on the main cap ensure a secure top cap fit and no leaking between the base and cap.

The Castle RDA comes with a spare o-ring and extra post screw.

Available in semi-brushed polished stainless steel (left of photo)
454 Big Block RDA by Kryptonite Vapor
454 Big Block RDA by Kryptonite Vapor
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $84.95

In USA stock and ready to ship!!


AUTHENTIC USA Made 454 Big Block rebuildable atomizer by Kryptonite Vapor

Build a better mouse trap is what they say, well it has been done with the 454 RDA. It starts with a totally unique single post design. Instead of a dual or quad negative post, they went with a ring and used the entire outside of the base for the negative and allows to easily build just about any conceivable configuration of coils you can think of. The 454 has an adjustable air flow design that will produce a single, dual, or quad holes which are both direction and air-flow adjustable to accommodate whatever coil build you prefer. Oh wait they didnt stop there, the single post actually uses a copper inner that goes from the bottom of the atty all the way up through to the bottom of the positive coil holes. And as for the holes in the positive post, well they are big enough to drive a truck through. The insulator is not Delrin like most attys, its some high temp plastic called ULTEM. They say its 4 times stronger than Delrin and was designed for temperatures of almost 400 degrees. No more spinning posts!

The removable top acts as a heat sink which reduces heat and makes putting juice on your coils much easier than taking the whole cap off or dripping through the tip. Its also conical to enhance the flavor. The 454 also comes with a cool black Delrin and stainless steel tip. But the best part about the tip is its anti-spit back design. The holes are on the side, not the bottom. This prevents spit back and at the same time created even more flavor. It comes in a window top tin and its really something you have to see for yourself to appreciate all the features.

Gunmetal and black versions have a gold plated center contact.

There are a lot of fake Patriot atomizers being sold on the market. To verify that you're buying an original, visit InnoVape's distributor list on their website at: http://www.innovapemods.com/#!distributors/c1mya

The Patriot is a 22mm dripping atomizer designed and made in the USA.

Features:

Large deep deck well allows you to drip more liquid into the RDA. This means more draws in between topping off.

Dual air holes for maximum air to wick exposure. Most people enlarge these holes but that is up to you.

Triple posts wth through hole design ensures your coil terminals make good contact and don't move.

Precision machined out of 303 stainless steel.

Dual o-rings on the deck base ensure a secure cap fit and no leaking between the base and cap.

Unique heat sink fins on the top cap help dissipate heat.

Available in polished stainless steel, brushed stainless steel, gunmetal and matte black. Sold individually.
- See more at: http://www.vaporkings.com/AUTHENTIC-v1-2-Patriot-...

Build a better mouse trap is what they say, well it has been done with the 454 RDA. It starts with a totally unique single post design. Instead of a dual or quad negative post, they went with a ring and used the entire outside of the base for the negative and allows to easily build just about any conceivable configuration of coils you can think of. The 454 has an adjustable air flow design that will produce a single, dual, or quad holes which are both direction and air-flow adjustable to accommodate whatever coil build you prefer. Oh wait they didnt stop there, the single post actually uses a copper inner that goes from the bottom of the atty all the way up through to the bottom of the positive coil holes. And as for the holes in the positive post, well they are big enough to drive a truck through. The insulator is not Delrin like most attys, its some high temp plastic called ULTEM. They say its 4 times stronger than Delrin and was designed for temperatures of almost 400 degrees. No more spinning posts!

The removable top acts as a heat sink which reduces heat and makes putting juice on your coils much easier than taking the whole cap off or dripping through the tip. Its also conical to enhance the flavor. The 454 also comes with a cool black Delrin and stainless steel tip. But the best part about the tip is its anti-spit back design. The holes are on the side, not the bottom. This prevents spit back and at the same time created even more flavor. It comes in a window top tin and its really something you have to see for yourself to appreciate all the features.

Gunmetal and black versions have a gold plated center contact.

There are a lot of fake Patriot atomizers being sold on the market. To verify that you're buying an original, visit InnoVape's distributor list on their website at: http://www.innovapemods.com/#!distributors/c1mya

The Patriot is a 22mm dripping atomizer designed and made in the USA.

Features:

Large deep deck well allows you to drip more liquid into the RDA. This means more draws in between topping off.

Dual air holes for maximum air to wick exposure. Most people enlarge these holes but that is up to you.

Triple posts wth through hole design ensures your coil terminals make good contact and don't move.

Precision machined out of 303 stainless steel.

Dual o-rings on the deck base ensure a secure cap fit and no leaking between the base and cap.

Unique heat sink fins on the top cap help dissipate heat.

Available in polished stainless steel, brushed stainless steel, gunmetal and matte black. Sold individually.
- See more at: http://www.vaporkings.com/AUTHENTIC-v1-2-Patriot-...
AUTHENTIC Atomic RDA by Masterpiece Custom Vapes
AUTHENTIC Atomic RDA by Masterpiece Custom Vapes
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $84.95


CURRENTLY SOLD OUT!


(3)

AUTHENTIC Philippine made ATOMIC RDA by Masterpiece Custom Vapes

The Atomic from MCV is a very versatile 4 piece 3 post dripping atomizer. It can be easily configured to be a mouth to lung RDA or a direct lung inhale RDA.

Configurable as dual or single coil, the 19mm RDA features an adjustable air hole ring which can be turned for single hole or dual holes. Sizes selectable are 1.5mm, 2.00mm or 3.00mm.

To adjust the air holes you simply unscrew the top cap a few turns, rotate the airflow ring and re-tighten the top cap.

Standard 510 threads means the Atomic is compatible with most any 510 threaded device on the market.

Deck posts are through hole design with phillips head screws.

Made from high quality 304 stainless steel and engraved with the ATOMIC by MCV Philippines logo.

Brushed stainless steel finish.
AUTHENTIC v1.2 Patriot USA Made RDA
AUTHENTIC v1.2 Patriot USA Made RDA
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $69.99

(5)

These are all v1.2 Patriots. The top caps now sit flush with the base of the atomizer deck. v1.2 caps will -not- work on v1 decks but v1.2 caps will work on v1 decks (with a small gap).

AUTHENTIC USA made Patriot rebuidable dripping atomizer from InnoVape.

Gunmetal and black versions have a gold plated center contact.

There are a lot of fake Patriot atomizers being sold on the market. To verify that you're buying an original, visit InnoVape's distributor list on their website at: http://www.innovapemods.com/#!distributors/c1mya

The Patriot is a 22mm dripping atomizer designed and made in the USA.

Features:

Large deep deck well allows you to drip more liquid into the RDA. This means more draws in between topping off.

Dual air holes for maximum air to wick exposure. Most people enlarge these holes but that is up to you.

Triple posts with through hole design ensures your coil terminals make good contact and don't move.

Precision machined out of 303 stainless steel.

Dual o-rings on the deck base ensure a secure cap fit and no leaking between the base and cap.

Unique heat sink fins on the top cap help dissipate heat.

Available in polished stainless steel, brushed stainless steel, gunmetal and matte black. Sold individually.
AUTHENTIC JPGE Nimbus RDA
AUTHENTIC JPGE Nimbus RDA
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $69.95

In USA stock and ready to ship!!


(2)

AUTHENTIC Philippine made Nimbus rebuidable dripping atomizer from Jeyps & Saint Quii/JPGE.

The Nimbus is approximately 20mm wide and is 510 threaded for maximum compatibility with most any device.

Features:

Cap is pre-drilled with dual air holes and can be enlarged by using a drill (please be careful).

Triple posts with through hole design ensures your coil terminals make good contact and don't move.

Top cap has a unique "spit-guard" feature which helps prevent liquid getting into your mouth due to over dripping. Ironically it also can enhance the flavor of your e-Liquids when -not- overfilled.

Precision machined out of food grade 304 stainless steel.

Dual o-rings on the deck base ensure a secure cap fit and no leaking between the base and cap.

Photo displays two Nimbus atomizers. You will receive ONE unit per item ordered.
InnoVape Patriot replacement cap
InnoVape Patriot replacement cap
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $40.00

(4)

Replacement top cap for the InnoVape Patriot rebuildable atomizer.

The black and gun metal caps are v1.2 caps and will fit v1 and v1.2 atomizers decks just fine.

The 24k gold plated caps are v1 and will fit v1 and can work with v1.2 atomizer decks if positioned correctly. You will have a gap at the base.

To determine what version of the Patriot you have, remove the top cap and look on the inside. If it is smooth all the way to the top, it is a v1. If there is a ridge about 1/4" the way up, it is a v1.2.

We do not guarantee these will work with clones and returns will not be accepted due to clone fitment issues.

Sold individually in your choice of color.
innoVape Silencer pyrex drip tips
innoVape Silencer pyrex drip tips
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $32.00

(13)

American made stainless steel/brass with pyrex glass drip tips from InnoVape.

From left to right:

Stainless Silencer
Stainless Exhaust Silencer
Stainless Silencer with stainless cap
Brass Silencer
Brass Exhaust Silencer
Brass Silencer with brass cap
GhostModder USA made wide bore tapered drip tips
GhostModder USA made wide bore tapered drip tips
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $25.00

(19)

These American made drip tips from Ghost Modder feature a tapered inside bore. This means when you drip your e-Liquid into them, it runs straight into your atomizer and doesn't collect on the "ledge" that most typical drip tips have.

The brass and stainless steel versions have GM laser etched in the side. The titanium version has "Ghost" etched in the side in Japanese characters and each have a unique serial number.

3/11/2014 - Brass and stainless steel are now available in a shorty low profile version

Sold individually in your choice of material and size.
Clear RDA top cap
Clear RDA top cap
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $22.95

(4)

Clear caps for your rebuildable drip atomizers.

Removable clear drip tip can be replaced with most any 510 style drip tip of your choice. Air holes can be easily drilled to your preferred size.

Available for:

Youdetech IGO-W
Nimbus/Trident

NOTE: The Nimbus/Trident clear cap is verified to fit the Grand Vapor Trident Version 2. Other variants such as
Trident Version 1, "Replicas", etc have not been tested and come with no guarantee of compatibility.

Sold individually
AUTHENTIC Origen drip tip
AUTHENTIC Origen drip tip
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $22.00

(2)

AUTHENTIC Origen drip tips by Norbert.

These are sleek and simple wide bore drip tips made of stainless steel. Plenty of air flow for cloud chasers.

Mouthpiece portion is available in short 10mm or longer 14mm length.

Made in Hungary
Missile drip tips by InnoVape
Missile drip tips by InnoVape
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $20.00

(6)

American made solid brushed stainless steel missile drip tips from InnoVape.

From left to right:

Patriot
Tomahawk
Maverick
GCase mod carrying case
GCase mod carrying case
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $19.95

(3)

The GCase is a mod carrying case designed to be attached to your belt loop, purse or anything else that the aluminum carabiner can attach to.

Inside the case is a soft lining and a elastic strap which holds the top of your device snug even if the zipper is wide open.

On the back side of the case is a small mesh net pocket large enough to carry a small bottle of e-Liquid or a spare battery.

Made from durable nylon material with a quality zipper with rubberized pull.

Available in six different color combinations. Sold individually.
KK Vapetek atomizer coil jig
KK Vapetek atomizer coil jig
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $19.95


CURRENTLY SOLD OUT!


(52)

The KK Vapetek coil jig is a handy little pocket device that makes wrapping coils simple and consistent every time.

Simply remove one of the wrapping posts from the internal compartment, insert it into the top hole and tighten the set screw. Wrap one end of your coil wire around the lower set screw and tighten it. Then simply begin wrapping your coil around the wrapping post until it has as many wraps as you require. When you're done, snip the ends and remove it from the wrapping post. You can also remove the wrapping post with the coil still on it and use it as a stabilization tool to attach it to your rebuildable atomizer.

A demonstration video can be watched below.

The three included wrapping posts are: 1/16", 3/32", and 1/8" in size. The set screw hole will accept up to 9/64" if you want to make your own larger rods.

The device also doubles as an atomizer stand since it has a 510 threaded hole in the center.

Please do not torch your coils while they are still attached to the jig body. The set screws are nylon and will melt. Also do not over tighten the set screws or you may strip them.

Made in the USA.

Kanthal wire shown in second photo is -not- included.
Royal drip tips by Vape Smith
Royal drip tips by Vape Smith
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $18.00

(4)

Premium Royal drip tips from Vape Smith.  Available in stainless steel, white delrin or black delrin.  Pawn and rook available now...more coming soon.

Royal drip tips fit most any 510, 901 or 808 style atomizer/cartomizer and work great with rebuildable drip atomizers.
Cherry Vape Universal Delrin drip tip
Cherry Vape Universal Delrin drip tip
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $6.00

(6)

The Universal from Cherry Vape is more than a drip tip. The main "feature" of the Universal is the intensely huge inside diameter. What does this mean? Massive airflow for your rebuildables!

What else can it do?

It can be used as an insulator for your metal drip tips. You simply insert the Universal into your device and then put your metal drip tip in the Universal. The Delrin plastic insulates your metal tip from the heat of your rebuildable atomizer.

You can also stack the Univeral making a drip tip 10ft long if you want!

The bottom stem of the Universal may need shortened for some drip atomizers or tank style rebuildables. We suggest using a Dremel tool since trying to cut them with a knife could either result in cutting yourself or cracking the tube. Be sure to clean up any debris left over from cutting or grinding the stem since those particles could be inhaled.

Sold individually in your choice of black or white.
Keychain mini screwdriver
Keychain mini screwdriver
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $2.95

(17)

Keychain mini screwdriver has a phillips and flat head screwdriver inside. A perfect little tool for RDA or RBA users to keep in their pocket or carrying case.

Available in silver, red or blue. Sold individually.
VapeBands
VapeBands
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $1.75

(3)

Authentic VapeBands - Silicone rubber bands with debossed text on each side

What is a VapeBand?

A VapeBand is a high quality silicone band that is custom made from a mold with debossed text. The process of creating a mold and debossing allows VapeBand to create custom bands with text that can go fully round the outer band and allow us to have a front and back with different text or logos.

All our bands are debossed with words recessed into the silicone via an imprint mold and text colored recessions, making the lettering more visible.

All of our bands are embossed with "vapeband.com" on the inner ring which protrudes about 2 millimeters from the bands surface. This identifies that they are Genuine/Official VapeBand products.

Our silicone bands display high levels of elasticity, allowing them to stretch over most mods fitting 22mm + surfaces up to rougly a 26650 battery sized mods [over stretching our bands will void any warranty]. Our bands grip easily to metal and glossy surfaces such as stainless steel, brass, copper, titanium, anodized aluminum, polycarbonate, pyrex glass and stickers.

How you can use your VapeBand:

VapeBands can be used to give your mod a voice, what we call "Mod Speak", or to give your device a new look, cover blemishes etc., but these high quality silicone bands perform a variety of functions for the vape enthusiast, using them on but not limited to:
  • tanks, genesis atomizers, rebuild-able drippers, creating a bumper for your devices & components
  • devices that require adjustable airflow where the function is not supported by the native device, or for those over bored out (drilled) holes where what normally would be the time to retire the devise, now some might be re-usable and take on a new look along with being functional again
  • telescopic mods and the gaps when using different battery sizes
  • bottles where they create a grippe surface that can assist in opening
  • other surfaces where gripping in required to un-thread one component from another, allowing for effortless removal

The functions above are some of the ones we have found VapeBands to perform and perform well, but these are just a few of the main uses and certainly not limited to these in any way. The Team at VapeBand looks forward to hearing how the vaping world receives our product, finding new ways to make use of this low cost high quality product.

Safety:

Silicone is a bonded polymer substance with numerous elastomeric qualities that make it both flexible and water resistant. Originally created as an insulating material, silicone is also fairly heat resistant, but is usually susceptible to deterioration from UV exposure. Vapers should not leave mods in direct sunlight exposing them to high heat, which is not recommended battery safety.

WARNING: When using VapeBands, please be sure that you are not covering the battery vent holes on your devices. The ventilation holes are there for your protection and covering these with VapeBands is not advised. VapeBand does not take any responsible for where you place these bands and we encourage vapers to take precaution when applying a band to an object. VapeBands should be kept away from direct flame even though they are typically heat-resistant, they do burn in direct flame. VapeBand recommends consumers remove our bands when rebuilding or in direct contact with flames.


Sold individually.