ABOUT SSL CERTIFICATES


We accept Visa, MasterCard and Discover credit cards for our DSE801 Classic Penstyle, DSE901 Mini, Joye510 and KR808D1 two piece e-Cigarettes, atomizers, cartomizers, batteries, e-Liquid and accessories
Join our mailing list!

Welcome.

Welcome to Vapor Kings of Tulsa, OK! - We put the CALM in your .COM shopping!

We ARE your Tulsa electronic cigarette supplies shop! If you bought your electronic cigarette on the internet, at the mall or in a tobacco shop, chances are we have parts for it!



Vapor Kings is your #1 source in Tulsa, OK for electronic cigarettes, e-Liquid and e-Cigarette accessories.



Innokin iClear30 dual coil clearomizer AUTHENTIC Grand Vapor Trident V2 RDA
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $14.95

In USA stock and ready to ship!!

Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $105.95


CURRENTLY SOLD OUT!

Innokin iClear30 dual coil clearomizer AUTHENTIC Grand Vapor Trident V2 RDA
The iClear30 from Innokin is a top mounted dual coil clearomizer with 4 bands of wicks, 16 strands total, to feed the dual atomizer coils.

The crystal clear liquid tank holds approximately 3ml of your favorite e-Liquid and is made of polycarbonate so be careful with strong e-Liquids because that type of damage is not covered by warranty.

These are 510 threaded and have air flow slots on the bottom so they will work fine with mods such as the ProVari or Silver Bullet.

The iClear30 also features a stainless steel swivel style drip tip.  Regular drip tips are not compatible with the iClear30.

You will receive (1) iClear30 with a pre-installed 2.2 Ohm atomizer coil head.
AUTHENTIC Philippine made Trident V2 rebuidable dripping atomizer from Grand Vapor.

The Trident V2 is approximately 21mm wide and is 510 threaded for maximum compatibility with most any device.

Features:

Air flow is adjustable by rotating the air flow ring in the center of the atomizer.

Solid copper center pin ensures good contact and conductivity.

Triple posts with through hole design ensures your coil terminals make good contact and don't move.

Cap style terminal screws contact your coil wire on two sides instead of smashing it in the center of the post.

Precision machined out of stainless steel.

Dual o-rings on the deck base ensure a secure cap fit and no leaking between the base and cap.

Photo displays two Trident V2 atomizers. You will receive ONE unit per item ordered. Original box shown in picture may not be included since some of them were damaged/cracked in shipment to us.
Joye eCab USB wall adapter AUTHENTIC JPGE Nimbus RDA
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $7.49

SALE PRICE: $4.95
That's $2.54 instant savings!  
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $69.95


CURRENTLY SOLD OUT!

Joye eCab USB wall adapter AUTHENTIC JPGE Nimbus RDA
This is a replacement USB wall adapter for the Joye eCab electronic cigarette. This plugs into your wall AC outlet and then you can plug your eCab USB charger into it. It does not charge batteries by itself.

This item is for one USB wall adapter in your choice of black or white.
AUTHENTIC Philippine made Nimbus rebuidable dripping atomizer from Jeyps & Saint Quii/JPGE.

The Nimbus is approximately 20mm wide and is 510 threaded for maximum compatibility with most any device.

Features:

Cap is pre-drilled with dual air holes and can be enlarged by using a drill (please be careful).

Triple posts with through hole design ensures your coil terminals make good contact and don't move.

Top cap has a unique "spit-guard" feature which helps prevent liquid getting into your mouth due to over dripping. Ironically it also can enhance the flavor of your e-Liquids when -not- overfilled.

Precision machined out of food grade 304 stainless steel.

Dual o-rings on the deck base ensure a secure cap fit and no leaking between the base and cap.

Photo displays two Nimbus atomizers. You will receive ONE unit per item ordered.
GPlat coil wire by Vapinology AUTHENTIC Rose V2 atomizer by Eden Mods
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $23.00
Items in stock ship TODAY (Mon-Fri) if ordered before 2PM CST!
Buy now for only: $199.95

In USA stock and ready to ship!!

GPlat coil wire by Vapinology AUTHENTIC Rose V2 atomizer by Eden Mods
GPlat coil wire by Vapinology is a unique blend of metals that heat up differently than Kanthal A-1. This is truly unique wire that allows you to build larger coils with lower resistance.

Use Kanthal A-1 to experiment with your builds and then use G-Plat Elite in your "all day vape" device long term. Even if you use 12-15 inches a month, 15 feet will last you as long as a year!

We currently only carry the Elite line and it is available in 26, 24 and 22 gauge round in 15 foot sections. Also included in the package is 3 balls of ready to use organic cotton.

Haywire 20 gauge is now also available.

Sold in 15 foot sections individually in your choice of gauge and includes three ready to use organic cotton balls.

This is an advanced user product and is used at your own risk.
Introducing The Rose V2 Atomizer

See the video below that demonstrates a build on the Rose atomizer!

The Rose is a very special device for connoisseurs. The Rose's feature list is unique. No atomizing device available today can offer a feature rich list as comprehensive as The Rose.

Main Characteristics:

Material: Stainless Steel Type 316 (half tank is made of clear polycarbonate with a spare Stainless Steel 316 half tank)
Diameter: 22mm
Length (including drip tip and connector): 79,5mm
Length (excluding drip tip and connector): 54,5mm
Wick type: Silica rope or cotton
Connector type: 510 (M7x0,5mm Pitch)
Tank Capacity: 3.7ml

Special Features:

Single coil or dual coil configurations - Single coil with 2 wicks or 2 coils with a wick each
Airflow control ring - Fully open will offer a 2.0mm hole for airflow
Juice flow control - By turning the drip tip, you can adjust the flow of juice onto the coil
Ceramic coil cup - You can choose to not use the coil cup if you prefer
Re-coiling without emptying tank - Simply invert and unscrew the coil head assembly for re-coiling
No resistance wire not needed - Careful attention has been made to the ease of setting up a coil in The Rose
Inverted or regular e-juice filling - Either remove the coil head or the top cap to fill with your favourite e-juice
Adjustable 510 centre pin - Made from lead-free brass

Exclusive gift:
Each Rose Atomiser comes with a stand made from Stainless Steel 316 so you can rest your inverted Rose while re-coiling without fear of spilling your e-juice
If you invert the stand, it will allow you to store your Rose by screwing it into the 510 thread on the stand

Spares:
Included with The Rose is a kit of spares including a Stainless Steel 316 half tank, spare ceramic cup, o-rings, screws with allan key and some wick and wire to get you started!

All in a beautifully made presentation box.

Made in the UK.
Legal Disclaimer


Legal: Our products are not intended to diagnose, treat, cure or prevent any disease or addiction. Information and statements made are for educational purposes and are not intended to replace the advice of your health care professional. By purchasing our products, you agree to use products at your own risk. Under no circumstances will Vapor Kings be held responsible or liable, directly or indirectly, for any loss or damage that is caused or alleged to have been caused in connection with use of, or reliance on any product on this site.

Live visitor globe!


Click to Verify - This site has chosen an SSL Certificate to improve Web site security

This site protected by Trustwave's Trusted Commerce program

Find Vapor Kings on FaceBook!

Follow us on Instagram!

Follow vaporkings on Twitter

Find Vapor Kings on YouTube!

SFATA Member Seal

American Vaping Association